Brush Fender Single Axle Bumper Pull Stock Trailer 7,000 LB

Side options

Slated

52” high

46 ½ with 2 ½ gap

Tubing 1” x 2”

Rear gate options

Butterfly

Full Swing One Piece

Full Swing w/Slider

Available colors

Black

White

Gray

Sand

Silver

Red

Maroon

G.V.W.R:	7,000 lbs
G.A.W.R.:	7,000 lbs
Coupler:	2- 5/16” Gooseneck Coupler (25,000 lb)
Safety Chains:	⅜” Grd. 70 with safety Latch Hook (2 each)
Jack:	10,000 lbs. Side Wind Drop Leg
Tongue:	4" Channel Fold Back Tongue
Top:	Bar top, Aero nose with tarp roof, Aero nose with full metal roof, Aero nose with partial metal roof
Division Gate:	1 Solid Gate
Rear Gate:	Full swing with half slider
Escape Door:	36” Side door (left side)
Frame:	11 Ga. Sheet Metal with Angle Iron Reinforcement
Crossmembers:	2” x 3” Tubing & Angle iron 3/16” x 2” x 2”
Sides:	6” Metal slats, 52” Closed sides, 46.5” Close sides with 2.5” gap, 1” x 2” tubing sides, Cowboy sides
Axles:	One 7,000 lb camabered axle with elec. Brakes
Suspension:	Torsion
Tire:	16" (Spare Tire &Wheel Included)
Wheel:	16" White Spoke 8 Bolt
Floor:	2" Treated Pine Lumper Deck
Lights:	D.O.T. Stop, Tail, Turn and Clearance (LED)
Elec. Plug:	7-Way RV
Finish (Prep.):	Mechanical and/or Chemical Pre-treatment for maximum Paint Adhesion & 1 Coat of Primer
Finish:	Painted with two Coats Automotive Quality Acrylic Enamel

Difference Between 1 Drop Spring Axle to 1 Torsion Axle
7' Tall
1" x 2" Tubing Sides From Fenders Up, round Tubing on top
Two 7-1/2" Round Vent in Front
Cleated Rubber Floor
Smooth Rubber Floor
Rubber Mats On Top Of Wood Floor
Spray-in Liner (minimun 12") includes runners and crossmembers on top and bottom

BFST6012W07LR1A	6' x 12' Bumper Pull Single Axle Stock Trailer
BFST5014W07LR1A	5' x 14' Bumper Pull Single Axle Stock Trailer
BFST6014W07LR1A	6' x 14' Bumper Pull Single Axle Stock Trailer
BFST5016W07LR1A	5' x 16' Bumper Pull Single Axle Stock Trailer
BFST6016W07LR1A	6' x 16' Bumper Pull Single Axle Stock Trailer
BFST6816W07LR1A	6.8' x 16' Bumper Pull Single Axle Stock Trailer