Tandem Axle Bumper Pull Stock Trailer 7,000 LB

Side options

Slated

52” high

46 ½ with 2 ½ gap

Tubing 1” x 2”

Rear gate options

Butterfly

Full Swing One Piece

Full Swing w/Slider

Available colors

Black

White

Gray

Sand

Silver

Red

Maroon

G.V.W.R:	7,000 lbs
G.A.W.R.:	3,500 lbs
Coupler:	2" Bulldog (7,000 lbs.)
Safety Chains:	Two 5/16" Grd. 70 with safety Latch Hook
Jack:	4,000 lbs. Top Wind (Swing-up)
Tongue:	4" Channel Fold Back Tongue
Top:	Round Cap in Front With Metal Top
Division Gate:	1 Solid Gate
Rear Gate:	Full Swing with Half Slider
Escape Door:	Side Door (Right Side)
Frame:	2-1/2" x 2-1/2" x 1/4" Angle Iron
Crossmembers:	2-1/2" x 2-1/2" x 1/4" Angle Iron
Sides:	Side Wall: 52” Closed sides, 46.5” Close sides with 2.5” gap, 1” x 2” tubing sides, Cowboy sides
Axles:	Two 3,500 lb 4" Drop Spring Axles (1 Idler & 1 with elec. Brakes)
Suspension:	Multi-Leaf Spring with equilizer
Tire:	15" (Spare Tire &Wheel Included)
Wheel:	15" White Spoke 5 Bolt
Floor:	2" Treated Pine Lumper Deck
Lights:	D.O.T. Stop, Tail, Turn and Clearance (LED)
Elec. Plug:	7-Way RV
Finish (Prep.):	Mechanical and/or Chemical Pre-treatment for maximum Paint Adhesion & 1 Coat of Primer
Finish:	Painted with two Coats Automotive Quality Acrylic Enamel

Difference Between 2 Drop Spring Axles to 2 Torsion Axles
Add Brakes To Second Axle
7' Tall
1" x 2" Tubing Sides From Fenders Up, round Tubing on top
Gravel Guard on Front of Fenders (Diamond Plate Aluminum)
Two 7-1/2" Round Vent in Front
Cleated Rubber Floor
Smooth Rubber Floor
Rubber Mats On Top Of Wood Floor
Spray-in Liner (minimun 12") includes runners and crossmembers on top and bottom

ST6012W07LR	6' x 12' Bumper Pull Tamden Axle Stock Trailer
ST5014W07LR	5' x 14' Bumper Pull Tamden Axle Stock Trailer
ST6014W07LR	6' x 14' Bumper Pull Tamden Axle Stock Trailer
ST5016W07LR	5' x 16' Bumper Pull Tamden Axle Stock Trailer
ST6016W07LR	6' x 16' Bumper Pull Tamden Axle Stock Trailer
ST6816W07LR	6.8' x 16' Bumper Pull Tamden Axle Stock Trailer